Easy Way to Format an NTFS Flashdisk for Maximum Performance

Flashdisk is a storage device that is often used for various needs, both for storing documents, images and multimedia files. However, sometimes the flash disk needs to be formatted so that it continues to work optimally. One of the most recommended formats to improve performance is NTFS. With this format, you can store large files and take advantage of better security features. This article will discuss an easy way to format an NTFS flash disk and several solutions to other formatting problems.

Before discussing further about how to format an NTFS flash disk, it is important to understand why this process is necessary. Flash disks are often used on various devices with different operating systems, such as Windows, Mac, or Linux. Each operating system has a different system file format, and NTFS is one of the most widely used system file formats on Windows devices. This format is known to have the ability to store files larger than 4GB in size, which is not possible with the FAT32 format.

In addition, the NTFS format has better recovery capabilities if an error occurs, and supports file encryption for additional security. Because of this, many users choose to format their flash drives to NTFS. However, this process must be done correctly to avoid data loss or other problems that may arise.

Below, we will discuss the steps on how to format an NTFS flash disk on various operating systems and solutions to some common problems when formatting a flash disk.

How to Format an NTFS Flashdisk in Windows

Windows is the most commonly used operating system, and fortunately, the process of formatting a flash disk to NTFS is very easy to do. However, before you start, make sure you have backed up all important data on the flash disk, because the format process will erase the entire contents of the flash disk.

Steps to Format NTFS Flashdisk in Windows:

1. Plug the flash disk into the USB port on the Windows computer.
2. Open “File Explorer” and look for the flash disk you want to format.
3. Right click on the flash disk icon, then select “Format”.
4. In the “File System” section, select “NTFS”.
5. Check the “Quick Format” option if you want the process to be faster.
6. Click “Start” to begin the format process.
7. Wait until the process is complete, and your flash disk has been formatted to NTFS.

After the flash disk is formatted to NTFS, you will be able to store large files without the 4GB size limit that is in FAT32. However, keep in mind that flash disks formatted with NTFS may not be read on non-Windows devices, such as some types of TV or digital cameras.

Steps to Format a FAT32 Flashdisk on Mac

For Mac users, although NTFS is an excellent format for Windows devices, you may want to use FAT32 or exFAT formats which are more compatible with various systems. However, if you really need the NTFS format, there are several methods you can use with additional software.

How to format a flash disk to FAT32 on Mac:

1. Plug the flash disk into your Mac.
2. Open the “Disk Utility” application which is in the “Applications” folder or can be searched via “Spotlight”.
3. Select the flash disk you want to format from the list of available devices.
4. Click the “Erase” button at the top.
5. Select “MS-DOS (FAT)” for FAT32 format or “exFAT” if you want to save a larger file.
6. Click “Erase” to start the format process.

By following these steps, your flash disk will be formatted to FAT32, which is more compatible with various devices such as cameras, TVs, and game consoles. Unfortunately, if you still want to use NTFS on your Mac, you need to use a third-party application such as Paragon NTFS or Tuxera NTFS.

How to Format an Unreadable Flashdisk in Windows

One of the problems that users often face is an unreadable flash disk in Windows. This can be caused by many factors, such as damaged system files, viruses, or a flash disk that has worn out due to too much use. Fortunately, there are several ways you can try to format an unreadable flash disk in Windows.

Steps to Format an Unreadable Flashdisk:

1. Plug the flash disk into the USB port on the computer.
2. Open “Disk Management” by typing “Disk Management” in the search box and selecting “Create and format hard disk partitions”.
3. Look for an unreadable flash disk in the list of existing partitions.
4. If the flash disk is detected but there is no format, right click and select “Format”.
5. Select “NTFS” or other format you need, then click “OK”.

If the flash disk does not appear in “Disk Management”, it is likely that your flash disk is physically damaged, and you may need to consider replacing it with a new one.

How to format a flash disk without losing data

Formatting a flash disk will usually delete all the data on it, but there are several ways to make a backup before the format process so that the data remains safe. This is very important especially if you have important files that cannot be lost.

Backup Steps Before Formatting a Flashdisk:

1. Plug the flash disk into the computer and open the flash disk folder in File Explorer.
2. Select all the files on the flash disk, then copy them (Ctrl + C).
3. Create a new folder on your computer or external hard disk, and paste (Ctrl + V) all files into the folder.
4. After the data has been successfully backed up, then format the flash disk according to the steps above.
5. After the format process is complete, you can restore the files to the flash disk by copying the files from the backup folder to the flash disk.

With this method, you can ensure that your data remains safe even if the flash disk has to be formatted to improve its performance.

Solution for formatting a flash disk that cannot be formatted

Some users experience a problem where their flash disk cannot be formatted, either because it is damaged or there is a problem with the system files. If you experience this problem, there are several solutions you can try.

Solution for a flash disk that cannot be formatted:

• Use “Command Prompt”: Open “Command Prompt” as administrator, then type the command diskpart, list disk, select disk [nomor flashdisk]And clean. After that, try formatting the flash disk again.
• Use Third Party Software: There are several applications that can help format flash disks that are difficult to format, such as the HP USB Disk Storage Format Tool or EaseUS Partition Master.
• Check Write Protection (Write Protection): Some flash disks have a write protection feature. Make sure write protection is off before trying to format.
• Try on Another Computer: Sometimes, the problem can be resolved by trying to format on another device. Plug the flash disk into another computer and repeat the format process.

Conclusion

Formatting a flash disk is an important step to maintain its performance and compatibility with various devices. The NTFS format in Windows is ideal for storing large files and provides better security. However, if you often use flash disks on various devices such as Macs or game consoles, FAT32 or exFAT could be a more compatible choice.

Before formatting, make sure to always back up your data so you don’t lose important files. If the flash disk is unreadable or difficult to format, there are several solutions you can try, such as using “Disk Management” or a third-party application.

By following the guide above, you can format your flash disk easily, regardless of the problems that may arise. So, don’t hesitate to try a solution that suits the problem you are facing, and make sure your flash disk is always ready to use at any time!